Modifications apportées à l'étape #3
Modifié par Remington Goodwin —
Modification approuvée par Remington Goodwin
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Using a #000 Phillips screw driver, remove the three screws, 5mm in length, as indicated by the red circles. | |
| [* orange] Using a #000 Phillips screw driver, remove the single screw, 3mm in length, from the I/O board as indicated by the orange circles. | |
| + | [* icon_caution] Carefully remove the orange wire ribbons once screws are removed |