Historique de l'étape n° 11 de iPod Nano 2nd Generation Case Assembly Replacement

	[* black] Use a spudger to disconnect the headphone jack cable from the logic board. You need to gently pry the connector toward (or up, if you like, the connector is like LEGO® building blocks) the front of the iPod until it comes loose from the logic board.
-	[* black] Special hint for the reassembly: Push the connector inside until it is over the corresponding connector of the logic board. Then insert a thin tool over the connector and push it down onto the logic boards connector.
+	[* black] Special hint for the reassembly: Push the connector inside until it is over the corresponding connector of the logic board. Then insert a thin tool over the connector and push it down onto the logic boards connector. A pair of tweezers with one leg inside over the top of the connector, and the other leg outside the ipod. Then the connector can be squeezed into place.