Modifications apportées à l'étape #7
Modifié par iRobot —
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Place the soldering iron onto the battery wire and metal connector for one to two seconds to heat them up. |
|---|---|
| + | [* black] Add the solder wire and wait for the solder to melt onto the wire. Once a small bead has formed around the wire, lift the solder away first and then remove the soldering iron. |
| + | [* black] Continue with the other two connections the same way, taking special care not to solder two of the connectors together. |
Image 1
Aucune image précédente
Ajouté