Historique de l'étape n° 1 de Canon Powershot SD880 Back Cover Replacement

-	[* yellow] Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen.
-	[* yellow] Remove the 2 screws (4.08 mm) on the other side. One is located under the rubber USB flap.
-	[* yellow] Remove the last screw (2.59 mm) located on the bottom of the camera.
-	[* black] Slowly pull the back cover of the camera.
+	[* yellow] Remove the two screws (2.41 mm long) on the side of the camera that are next to the LCD screen.
+	[* yellow] Remove the two screws (4.08 mm) on the other side. One screw will be located under the rubber USB flap.
+	[* yellow] Remove the last screw (2.59 mm) that is located at the bottom of the camera.
+	[* black] Slowly pull the back cover off of the camera.