Modifications apportées à l'étape #1
Modifié par Aaron Quinn —
Modification approuvée par Aaron Quinn
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Use the spudger to get underneath the antenna assembly and to pry it |
|---|---|
| + | [* black] Use the spudger to get underneath the antenna assembly in the bottom right corner and to pry it upwards. |
| [* black] Once the antenna assembly is loose, remove it by hand and set it on the magnetic project mat. | |
| [* icon_note] NOTE: You should hear a slight "click" when the antenna assembly has been completely loosened. |