Modifications apportées à l'étape #3
Modifié par Michael Biancardi —
Modification approuvée par Michael Biancardi
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Thread strings through the bridge | |
| [* icon_note] The first three strings (low E, A, and D), have thick and springy ends; the three thinnest strings (G, B, and high E), do not have thick or springy ends. You may use either set of strings. | |
| - | [* black] Insert the thick end of the string into the top of the bridge and thread it through until about 3 to 4 inches of the string |
| + | [* black] Insert the thick end of the string into the top of the bridge and thread it through until about 3 to 4 inches of the string stick out of the bottom. |
| [* black] Wrap the short end of the string around the long end of the string, creating a loop. | |
| [* black] Pass the short end of the string through the loop (2 or 3 times for thick strings, 3 or 4 times for thin strings). Make sure the final pass leaves the string underneath the bridge. | |
| [* black] Pull both ends of the string until the knot is tight. |