Modifications apportées à l'étape #12
Modifié par Chandler Mang —
Modification approuvée par Chandler Mang
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Locate the ribbon cable underneath the Wi-Fi print. |
|---|---|
| - | [* black] Insert a plastic spudger into a small hole on the side of the ribbon cable and pull the ribbon cable out of its housing. |
| + | [* black] Locate the ribbon cable underneath the "Wi-Fi" print. |
| + | [* black] Use the flat end of the plastic spudger to release the plastic clamp on the ribbon cable connector |
| + | [* black] Insert the pointed end of the plastic spudger into a small hole on the side of the ribbon cable and pull the ribbon cable out of its housing. |