Modifications apportées à l'étape #3
Modifié par Nicholas Pfingsten —
Modification approuvée par Nicholas Pfingsten
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Remove the 2 screws (2.15mm) from the circuit board. | |
| - | [* black] Gently pull on the ribbon wire with the tweezers to remove the circuit board. |
| + | [* black] Gently pull on the ribbon wire from ZIF connector with the tweezers to remove the circuit board. |
| [* icon_caution] Be careful not to damage the ribbon wire. |