Modifications apportées à l'étape #3
Modifié par Thomas Campo —
Modification approuvée par Thomas Campo
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Using the tweezers, move the thick red cable attached to the secondary board. | |
| - | [* black] Remove the secondary board from its position and move it out of the way. |
| [* black] Gently pull on the red/black wire in order to free the photo lens cylinder from the housing. | |
| + | [* black] Remove the secondary board from its position and move it upward, out of the way. |
| + | [* icon_caution] Be VERY careful from this point on to not damage the connection between the motherboard and the secondary board. |