Modifications apportées à l'étape #3
Modifié par Edward Pacheco —
Modification approuvée par Edward Pacheco
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* icon_note] You can skip this step if you are not replacing the Hard Drive, but still need to remove it to replace a different part. |
|---|---|
| [* red] Remove the two screws (3mm long) using a PH0 screwdriver that are holding the hard drive into the mounting bracket. | |
| [* black] Pull up on the black Mylar sheet and remove it from the existing hard drive, it has some adhesive, but will simply pull off with just a small amount of force. |