Modifications apportées à l'étape #2
Modifié par Tyler Price —
Modification approuvée par Tyler Price
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Rotate the device so the clock's display is facing away from you. | |
| - | [* black] Place the flat end of the spudger between the battery and the outer edge of the cavity. |
| - | [* black] Maintaining contact with the battery end, slowly lower the spudger to lift the battery end up and out of the cavity. |
| - | [* black] Once fully lifted, grab the end of the battery. |
| - | [* black] Slowly pull the rest of the battery out of the cavity. |
| - | [* icon_caution] Pulling too hard may result in damaging the battery clip and the connecting wires. |
| + | [* black] Use the flat end of the spudger to pry out the battery. |
| + | [* black] Once fully lifted, grab the end of the battery and pull out the rest of the battery. |
| + | [* icon_caution] Do not remove the battery all the way because it is still connected. Doing so may result in damaging the power wires. |