Modifications apportées à l'étape #13
Modifié par Philip Le Riche —
Modification approuvée par Philip Le Riche
- Avant
- Après
- Inchangé
Lignes de l'étape
[* yellow] Disengage two connectors on a small circuit board on the bottom of the 2nd hard disk bay and lift the screened cable off the bay. |
[* green] Remove 2 6.5mm black screws. (On reassembly it's important to put these screws back in the right holes otherwise the front cover of the laptop won't fit. |
[* black] Gently lift the motherboard from the right hand edge and disengage its connectors from their openings in the side of the laptop lower shell. You can now remove it completely. |
Image 1
Aucune image précédente
Ajouté