Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #13

Modifié par Philip Le Riche

Modification approuvée par Philip Le Riche

Avant
Après
Inchangé

Lignes de l'étape

[title] Motherboard - 2
[* yellow] Disengage two connectors on a small circuit board on the bottom of the 2nd hard disk bay and lift the screened cable off the bay.
[* green] Remove 2two 6.5mm black screws. (On reassembly it's important to put these screws back in the right holes otherwise the front cover of the laptop won't fit.
[* black] Gently lift the motherboard from the right hand edgeedge, first disengaging the audio sockets and disengage itsvolume control from the lower shell, then the connectors from their openings in the side of the laptop lower shellleft hand side. You can now remove it completely.
[* green] Remove 2two 6.5mm black screws. (On reassembly it's important to put these screws back in the right holes otherwise the front cover of the laptop won't fit.
[* black] Gently lift the motherboard from the right hand edgeedge, first disengaging the audio sockets and disengage itsvolume control from the lower shell, then the connectors from their openings in the side of the laptop lower shellleft hand side. You can now remove it completely.