Modifications apportées à l'étape #16
Modifié par Kyle Wiens —
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] |
|---|---|
| - | [* black] Tape the upper right antenna cable to the side of the internal framework ( |
| - | [* black] Route the bottom left antenna cable through the guides on the internal framework (marked in yellow) |
| - | [* black] Connect the orange ribbon cable from the interconnect board to the sound card (indicated in red) |
| + | [* black] Snap the antenna boards back into their respective posts. |
| + | [* black] Tape the upper right antenna cable to the side of the internal framework (circled in green). |
| + | [* black] Route the bottom left antenna cable through the guides on the internal framework (marked in yellow). |
| + | [* black] Connect the orange ribbon cable from the interconnect board to the sound card (indicated in red). |