Aller au contenu principal

Modifications apportées à l'étape #22

Modifié par Luke Soules

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Attach the other end of your new cable to the logic board where the optical drive was connected.
[* black] Carefully wrap up the extra cable and store it to the side of the hard drive.
[* icon_reminder] You may wantGetting everything to use cable ties to bundle the excess cable tightlyfit with these particular cables is somewhat challenging. If you don't stow the cable correctly, it will prevent the case from going back on all the wayway, and could also damage the hard drives.
[* icon_reminder] You may wantGetting everything to use cable ties to bundle the excess cable tightlyfit with these particular cables is somewhat challenging. If you don't stow the cable correctly, it will prevent the case from going back on all the wayway, and could also damage the hard drives.