Historique de l'étape n° 3 de Solis 837 Blender Repair

	[title] taking the washer and rubber of
	[* black] Now we come to the tricky part. You have to take the washer out to get to the rubber bushing.
	[* black] I did some twisting and turning to get the washer of. I also used the iFixit metal spudger together with a small plier to get it loose.
-	[* black] ~~I will replace the~~ washer ~~with a new one later, because it~~ is bended ~~when I was~~ taking it out. It is very difficult to get this part out, because it is tightly wrapped around the axel.
+	[* black] The washer is bended in the process of taking it out. It is very difficult to get this part out, because it is tightly wrapped around the axel. I flattened by placing it in between two wooden boards together with a hammer
	[* black] After you have taken the washer off, you can take the rubber off.
-	[* black] Look at the rubber, it consists of two parts, a plastic bushing and a rubber ring~~, which are glued together~~. Leave it like this~~, no need for more disassembling this component~~.
+	[* black] Look at the rubber, it consists of two parts, a plastic bushing and a rubber ring. Leave it like this.