/
Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
S'inscrire
Connexion

Modifications apportées à l'étape #4

Modifié par Bas Flipsen —

Modification approuvée par Bas Flipsen

Avant
Après
Inchangé

Lignes de l'étape

[title] unscrewing the T3 screws
-[* black] Alright, you get this far. Now we have to turn the component and unscrew the 4 Torx screws.
+[* black] Alright, you got this far. Now we have to turn the component and unscrew the 4 Torx screws.
[* black] I used a T3 screwdriver for this
[* black] Loosen the axel from the underside of the blender cup.
-[* black] You will see a rubber part which tightly fitted into the underside of the blender cup. This rubber is encapsulating the ball bearing (which probably is jammed).
-[* black] Take the rubber of the bearing. I looks like a car-wheel tire!
-[* black] Mine looked like on the foto, completely wrecked. This shows the bearing jammed and it rotated in the tightly fitted rubber "tire".
+[* black] You will see a rubber part which tightly fits into the underside of the blender cup. This rubber is encapsulating the ball bearing (which probably is jammed).
+[* black] Take the rubber of the bearing. It looks like a car-wheel tire!
+[* black] Mine looked like on the foto, completely wrecked because of rubber degradation. Fractions of the rubber made the bearing jam, which made the tightly fitted rubber "tire" rotate in its fitting, producing the burning rubber smell.