Modifications apportées à l'étape #1
Modifié par Knut —
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] The EM10 charging filter is located here. |
|---|---|
| + | [* black] If you are uncertain if the EM10 is broken, measure the two sides to see if the are connected. If everything is OK you should have about 0 Ohm both between the two cyan marked solderings and between the two yellow ones. You should NOT have connection between cyan and yellow. If you have no connection on either sides you will have to fix it. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté