Modifications apportées à l'étape #2
Modifié par Richdave —
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Remove the faulty EM10 filter. Use a soldering iron to melt the solder and gently lift off the filter with tweezers or pliers being careful not to pull the copper tracks off the motherboard. |
|---|---|
| + | [* black] Remove the faulty EM10 filter. Use a soldering iron to melt the solder and gently lift off the filter with tweezers or pliers, being careful not to pull the copper tracks off the motherboard. |
| [* icon_note] A replacement EM10 filter is available [http://www.logictoyz.com/nintendo-ds/nintendo-ds-lite-spare-parts/ds-lite-em10-filters-.html|HERE] (as at 01/01/12) no doubt other suppliers exist | |
| [* black] Solder new EM10 filter into place, ensuring correct orientation. If required, check the new filter with a multimeter to confirm before installing. | |
| [* icon_caution] Alternate method - Bridge the solder pads that correspond with each set of pads - yellow to yellow and cyan to cyan | |
| [* icon_note] Bypassing the EM10 filter may affect the system performance and is not recommended |