Historique de l'étape n° 2 de HP Mini 110-3131dx Keyboard Replacement

-	[* black] Turn the laptop upright and open it
-	[* black] Disconnect the clips located around the perimeter of the keyboard
-	[* red] Starting from the left or right side, slide the ifixit opening tool between the top edge of the keyboard and the plastic bezel
-	[* icon_note] ~~start~~ either above the esc key or the delete key
+	[* black] Turn the laptop upright and open it.
+	[* black] Disconnect the clips located around the perimeter of the keyboard.
+	[* red] Starting from the left or right side, slide the ifixit opening tool between the top edge of the keyboard and the plastic bezel.
+	[* icon_note] Start either above the esc key or the delete key.
	[* black] Lever the keyboard up until it comes out or you can also grab the keyboard with your fingers, and then gently pull the keyword until it comes out on both sides.
	[* icon_caution] * ''Be careful not to pull the keyboard out too fast because there is a fragile ribbon cable that attaches to the motherboard behind the keyboard.'' *