Modifications apportées à l'étape #1
Modifié par aarondcollege —
Modification approuvée par aarondcollege
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Turn the keyboard bezel into the opposite direction so that the touchpad is close to you. |
|---|---|
| + | [* black] Dissemble the ribbon cable from the receptacle on the touchpad circuit board. |
| + | [* icon_note] The ribbon cable will not tear apart because it is attached to the bracket that holds the touchpad in place. |
| + | [* black] Take out the four 2.9mm screws from the bracket using a phillips PH0 screwdriver. |
| + | [* black] To detach the touchpad, simply thrust the touchpad from the top of the keyboard bezel (the touch-sensitive side, not circuit board side). |
| + | [* icon_note] This shouldn’t require any force. |