Modifications apportées à l'étape #1
Modifié par Joel James —
Modification approuvée par Joel James
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Turn the keyboard bezel |
|---|---|
| + | [* black] Turn the keyboard bezel so that the touchpad is close to you. |
| [* violet] Dissemble the ribbon cable from the receptacle on the touchpad circuit board. | |
| [* icon_note] The ribbon cable will not tear apart because it is attached to the bracket that holds the touchpad in place. | |
| [* red] Take out the four 2.9mm screws from the bracket using a phillips PH0 screwdriver. | |
| [* black] To detach the touchpad, simply thrust the touchpad from the top of the keyboard bezel (the touch-sensitive side, not circuit board side). | |
| [* icon_note] This shouldn’t require any force. |