| - | [* black] Connect the 4 mm nut driver to the 4 mm aluminum driver. Finally connect the PH1 to the 4 mm nut driver. |
|---|
| - | [* black] Insert the driver into each of the 4 holes and twist counter clockwise to remove each screw. |
|---|
| - | [* black] Flip the base back over and pull off the top. |
|---|
| + | [* black] Connect the 4 mm nut driver to the 4 mm aluminum driver. Then, connect the PH1 head to the 4 mm nut driver. |
|---|
| + | [* black] Insert the driver into each of the 4 holes and twist counter clockwise to remove the screws. |
|---|
| + | [* black] Flip the base upright and pull off the top. |
|---|