Modifications apportées à l'étape #8
Modifié par Marcos Serrano —
Modification approuvée par Marcos Serrano
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] ***Remove the LED Light*** |
|---|---|
| [* black] The LED is connected to a pin at the end of one of the wires connected to the circuit board. | |
| [* black] Upon close inspection, you can see that the LED's two ends are bend(in the red square of the second image) to prevent it from slipping of off the pin. | |
| [* black] Use a blunt tweezers to bend and straighten the two ends. | |
| [* black] Once the two ends are straight, gently pull the LED out of the pin. |