Modifications apportées à cette étape
Modifié par Mani Jaishanker —
Modification approuvée par Mani Jaishanker
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Unscrew the marked screws with a |
|---|---|
| + | [* black] Unscrew the marked screws with a bit driver with a 4 mm nut driver and a PH1 extender. |
| [* black] Gently remove the circuit board. Make sure to untangle all the wires. | |
| [* black] For the replacement, follow steps 1, 2, and 3. | |
| - | [* black] For a complete reassembly, follow the [guide|84972|Teardown] guide in reverse from step 6. |