/
Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
S'inscrire
Connexion

Modifications apportées à l'étape #14

Modifié par Richard —

Modification approuvée par Richard

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Using a Phillips 0 screwdriver, remove the 15 screws that secure the computer base to the palm rest assembly.
+[* red] Use a Phillips #0 screwdriver to remove the 15 screws that secure the computer base to the palm rest assembly.
[* black] Afterwards, safely pry the computer base from the palm rest assembly using a plastic opening tool.
-[* icon_note] There are 3 different screws used: 3 screws on the edge of the optical drive (M2 x 2), 2 screws located where the battery was (M2 x 3), and the remaining 10 screws are (M2.5 x 8).
+[* icon_note] There are 3 different screws used: Three 2mm screws on the edge of the optical drive, two 3mm screws located where the battery was, and ten 8mm screws.