Modifications apportées à l'étape #1
Modifié par Joey Raganit —
Modification approuvée par Joey Raganit
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Insert one of the pry tools under a top corner and the other under the side of the top corner(making sure to get under the metal of the keyboard and not just the first layer of plastic). Then, pry the corner down and out from under the little overhang it's sitting under. | |
| [* black] Then, slide the pry tool on the top over to the next overhang and insert the second tool on the other side. Push down and pry out the keyboard. | |
| - | [* black] Repeat, all the way down to the opposite corner |
| + | [* black] Repeat, all the way down to the opposite corner. |