Modifications apportées à l'étape #2
Modifié par Oscar Ambriz —
Modification approuvée par Oscar Ambriz
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Insert a flat head screwdriver between the base of the speaker and the thin gray metal rod. |
|---|---|
| + | [* black] Move the rod up enough that it can be grasped by a needle nose plier. |
| + | [* black] Using a needle nose plier grasp the rod and begin to pull the rod out of the spearker untill fully removed. |
| + | [* black] Remove the remaining four rods. One present on the same side and two are located on the other speaker. |