Modifications apportées à l'étape #2
Lignes de l'étape
| [* icon_caution] Make sure you spend at least 5 minutes heating up the adhesive. Prying off the LCD Display too early can result in cracking the glass. | |
| [* black] Using a heat gun or hairdryer, apply heat approximately three inches above the LCD Display to warm up the adhesive around the outside edge of the phone. | |
| - | [* icon_note] Make sure to apply heat evenly across the outside edge of the device. |
| + | [* icon_note] Make sure to apply heat evenly across the outside edge of the device. You may also use an ***iOpener*** to apply heat evenly along the perimeter of the screen. |