/
Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
S'inscrire
Connexion

Remplacement de l'écran LCD du nikon s3700

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Étape précédente

Traduction de l’étape 2

Retourner au tutoriel
Anglais
Français
Étape 2
nikon s3700 LCD Display Screen Replacement, Replace LCD: étape 0, image 1 de 3 nikon s3700 LCD Display Screen Replacement, Replace LCD: étape 0, image 2 de 3 nikon s3700 LCD Display Screen Replacement, Replace LCD: étape 0, image 3 de 3
Replace LCD

  • Remove Rear casing.

  • With a thin blade, gently lift the top tight hand side of the buttons board releasing a peg from a hole on the midframe below. Whilst doing so, gently push on the top left hand side in order to release the buttons board from a clip. At the same time, the bottom left hand corner wil be released from another clip.

  • Flip over rear buttons board to expose LCD ZIF clamp.

  • Flip open the clamp of the ZIF connector and slide the ribbon cable out. (The connector may have a piece of sticky tape over it. Removing this may well open the connector clamping bar.)

  • The ZIF clamp is very fragile so please use caution when releasing the ZIF clamp. It breaks easily.

  • Remove the LCD.

Remplacez l'écran LCD

Retirez le boîtier arrière.

Retournez le panneau d'options arrière pour exposer la pince LCD ZIF.

Ouvrez la pince du connecteur ZIF et faites glisser le câble ruban vers l'extérieur.

La pince ZIF est très fragile donc soyez prudent lorsque vous relâchez la pince ZIF. Ça casse facilement.

Retirez l'écran LCD.

[title] Replace LCD
[* black] Remove Rear casing.
-[* black] Flip over rear options panel to expose LCD ZIF clamp.
-[* red] Flip open the clamp of the ZIF connector and slide the ribbon cable out.
+[* red] With a thin blade, gently lift the top tight hand side of the buttons board releasing a peg from a hole on the midframe below. Whilst doing so, gently push on the top left hand side in order to release the buttons board from a clip. At the same time, the bottom left hand corner wil be released from another clip.
+[* black] Flip over rear buttons board to expose LCD ZIF clamp.
+[* black] Flip open the clamp of the ZIF connector and slide the ribbon cable out. (The connector may have a piece of sticky tape over it. Removing this may well open the connector clamping bar.)
[* icon_caution] The ZIF clamp is very fragile so please use caution when releasing the ZIF clamp. It breaks easily.
[* black] Remove the LCD.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.