Aller au contenu principal

Comment changer l'adhésif pour vitre arrière iPhone

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 12 tutoriels qui comprennent cette étape.

Anglais
Français

Traduction de l’étape 9

Étape 9
iPhone 16 Pro Max Back Glass Installation: étape 0, image 1 de 3 iPhone 16 Pro Max Back Glass Installation: étape 0, image 2 de 3 iPhone 16 Pro Max Back Glass Installation: étape 0, image 3 de 3
  • Use a spudger or your fingers to lift the pull tab connected to the large front liner. The pull tab is often in a corner of the liner.

  • Use the pull tab to peel off the large front liner from the adhesive.

  • At this point, you may still have liner covering the perimeter, which prevents the adhesive from accidentally sticking to anything while you're reassembling your iPhone. Don't remove these small release liners just yet.

Utilisez la petite languette dans le coin supérieur droit pour retirer le film de protection adhésif rose.

-[title] Remove the adhesive liner
-[* black] Use the small pull tab in the top right corner to remove the pink adhesive liner.
+[* black] Use a spudger or your fingers to lift the pull tab connected to the large front liner. The pull tab is often in a corner of the liner.
+[* black] Use the pull tab to peel off the large front liner from the adhesive.
+[* icon_note] At this point, you may still have liner covering the perimeter, which prevents the adhesive from accidentally sticking to anything while you're reassembling your iPhone. ***Don't remove these small release liners just yet.***

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.