Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 6 tutoriels qui comprennent cette étape.
Traduction de l’étape 2
Étape 2
-
Using the spudger, gently push up the board from the pins underneath it.
-
Follow the board up and around the camera, gently unseating the board and cables.
-
The speaker will still be connected to the board via two small power wires. Use the tweezers to pull and unplug the power connector from the main rear accessory board.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.