Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

Autosampler Deployment (2021)

Retourner au tutoriel

Anglais

Français

Étape suivante

Traduction de l’étape 1

Étape 1

Autosampler Deployment (2021), Assemble the Sampler: étape 0, image 1 de 3

Autosampler Deployment (2021), Assemble the Sampler: étape 0, image 2 de 3

Autosampler Deployment (2021), Assemble the Sampler: étape 0, image 3 de 3

Assemble the Sampler

Ensure that the batteries are plugged in inside the boxes before assembly and that the node box is on manual mode (noted as manual mode or sampling normally on the battery box).
Fit the node box under the sampler lid on the side of the programmer next to the tubing outlet.
Fit the battery box behind the sampler.
Screw the battery terminal and the flow terminal into the sampler.
Wrap and tuck the wires on the unused side of the sampler and secure with tape and twist ties.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.