Aller au contenu principal

Mackie CR3 CR4 L/R Speaker Selector Bypass

Anglais
Japonais

Traduction de l’étape 1

Étape 1
Mackie CR3 CR4 L/R Speaker Selector Bypass: étape 0, image 1 de 1
  • Turn off your powered speaker, unplug it, and remove the 10 short Phillips head screws on the back that line the perimeter.

  • Once removed, give it a little wiggle, and you can pull out the electronics from the casing pretty easily. A little care is required, as there is cabling connecting it to the speaker front, but there is enough slack that you don't need to worry about disconnecting for this fix.

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.