Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront le tutoriel qui comprend cette étape.
Traduction de l’étape 3
Étape 3
Thread strings through the bridge
-
Insert the thick end of the string into the top of the bridge and thread it through until about 3 to 4 inches of the string stick out of the bottom.
-
Wrap the short end of the string around the long end of the string, creating a loop.
-
Pass the short end of the string through the loop (2 or 3 times for thick strings, 3 or 4 times for thin strings). Make sure the final pass leaves the string underneath the bridge.
-
Pull both ends of the string until the knot is tight.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.