Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 6 tutoriels qui comprennent cette étape.
Traduction de l’étape 2
Étape 2
Remove the heat sink
-
Grip the heat sink by its copper pipes and remove it.
-
Use the flat end of a spudger to scrape up and remove as much of the old thermal paste as possible.
-
Remove all the remaining thermal paste and its residue with high‑concentration (>90%) isopropyl alcohol and a microfiber cloth.
-
Apply new thermal paste where the old paste was.
-
Firmly push the heat sink into place.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.