Traduction de l’étape 2
Étape 2
Remove main PCB
-
Remove two 2.3 mm #00 screws holding the viewfinder LEDs. These will need to be properly aligned during reassembly.
-
Remove one 2.3 mm #00 screw.
-
Pull or pry off one 3.7 mm plastic retaining post.
-
Remove one 2.3 mm #00 screw.
-
Pull or pry off one 2.8 mm plastic retaining post.
-
Gently pull main PCB away from mirror box housing.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.