Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

Canon PowerShot SX120 IS Screen Replacement

Retourner au tutoriel

Anglais

Français

Étape précédente Étape suivante

Traduction de l’étape 3

Étape 3

Canon PowerShot SX120 IS Screen Replacement: étape 0, image 1 de 2

Canon PowerShot SX120 IS Screen Replacement: étape 0, image 2 de 2

Leave the camera facing down and locate the ribbon connector. The ribbon connector is placed bellow the main button panel on the bottom right side of the camera.
Lift the main button panel and gently hold the ribbon connector with the black tweezers.
While lifting and removing the ribbon connector with the tweezers make sure to not break the ribbon or the connection located on the bottom end of the ribbon. Remove the lower portion of the ribbon by using a spudger. You will be needing the ribbon connection to reassemble your device.
Once the ribbon has been entirely disconnected, lift the entire panel and place it above it's original positions. The panel will not be entirely removed only the lower half.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.