Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

Nintendo DS Lite Motherboard Replacement

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 13 tutoriels qui comprennent cette étape.

Retourner au tutoriel

Anglais

Néerlandais

Étape précédente Étape suivante

Traduction de l’étape 2

Étape 2

Nintendo DS Lite Motherboard Replacement: étape 0, image 1 de 3

Nintendo DS Lite Motherboard Replacement: étape 0, image 2 de 3

Nintendo DS Lite Motherboard Replacement: étape 0, image 3 de 3

In the following steps you must pull the antenna cable between the DS Lite game cartridge reader and motherboard. Pull slowly and stop when you feel resistance to avoid damaging the cable or motherboard.
Position the antenna cable with its connector facing up and away from the motherboard using a spudger to hold it down lightly in the gap between chips on the motherboard.
Slowly and carefully pull the antenna cable until the cable connector is under the DS Lite game cartridge reader.
Continue pulling the cable until the cable connector comes out from under the game cartridge reader on the right side.
When reassembling and attempting to feed the antenna cable back under the game cartridge reader, the cable may kink or become difficult to feed through. If so, try feeding a piece of thread through first; then, tie the thread to one end of the cable connector and pull it through, guiding it past any obstructions.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.