Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 2 tutoriels qui comprennent cette étape.
Traduction de l’étape 18
Étape 18
-
Release the plastic locking tab of the upper ribbon cable with the plastic spudger.
-
Pull the top ribbon cable from its mount with the fine tip metal tweezers.
-
Remove the bottom ribbon cable with the fine tip metal tweezers by pulling it toward the flash switch side of the camera.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.