Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 11

Étape 11
In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board. Use a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.
  • In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board.

  • Use a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.

次の4つの手順ではケーブルコネクターのみに差し込んで持ち上げ、基板上のソケットには接触しないでください。

スパッジャーの平面側先端を使って、正面カメラとセンサーケーブルコネクターの接続を外します。

[* icon_caution] In the next four steps, take care to pry up '''only''' on the cable connectors, and not on their sockets on the logic board.
[* black] Use the flat end of a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.
[* black] Use the flat end of a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.