Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

Solis 837 Blender Repair

Retourner au tutoriel

Anglais

Français

Étape précédente Étape suivante

Traduction de l’étape 2

Étape 2

Solis 837 Blender Repair, get the knife set out of the casing: étape 0, image 1 de 3

Solis 837 Blender Repair, get the knife set out of the casing: étape 0, image 2 de 3

Solis 837 Blender Repair, get the knife set out of the casing: étape 0, image 3 de 3

get the knife set out of the casing

When you look at this component, you will see four Torx T3 screws. Leave them for later and get to the other side.
Get a 10 wrench and something to hold the other side. I used a pipe wrench for this, but you can use any other plier for it (see photo for the tools). To loosen the bolt you have to turn it to the right (again unexpected, must be something Swiss ;).
If all went well you can now take all three knifes off and you will see a metal washer and underneath a rubber bushing.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.