Aller au contenu principal
Aide

Modifications de iPad Pro 10.5" Battery Replacement en attente

EN

Remarque : accepter ou refuser toute modification s’applique implicitement à toute modification précédente en attente de la même étape ou introduction.

Étape #6 modifiée : [Étape modifiée]

Modifié par Calion (3,5k)

(Vous n’avez pas assez de réputation pour examiner cette modification.)

-[* black] Use a pair of [product|IF145-020|tweezers] to peel off the tape that covers the ZIF connector for the SIM card tray flex cable.
+[* black] On cellular models, use a pair of [product|IF145-020|tweezers] to peel off the tape that covers the ZIF connector for the SIM card tray flex cable.


Étape #3 modifiée : [Étape modifiée]

Modifié par Calion (3,5k)

(Vous n’avez pas assez de réputation pour examiner cette modification.)

-[* black] Use the edge of a spudger to pry up and disconnect both the right interconnect cable and antenna cable, and gently fold them out of the way.
+[* black] Use the edge of a spudger to pry up and disconnect both the right interconnect cable and (for cellular models) antenna cable, and gently fold them out of the way.


Étape #1 modifiée : [Étape modifiée]

Modifié par Calion (3,5k)

(Vous n’avez pas assez de réputation pour examiner cette modification.)

-[* black] Use the edge of a spudger to pry up and disconnect both the left interconnect cable and antenna cable. Fold them gently out of the way.
+[* black] Use the edge of a spudger to pry up and disconnect both the left interconnect cable and (for cellular models) antenna cable. Fold them gently out of the way.
[* icon_caution] If either cable is glued to the board, use a little heat to soften the adhesive so you can separate the cable without damage.


Introduction modifiée

Modifié par Calion (3,5k)

(Vous n’avez pas assez de réputation pour examiner cette modification.)

Conditions préalables au tutoriel