Réparez vos affaires Communauté Boutique

This device page will show users how to replace various parts of the Cannon PowerShot SX260_HS. these things including LCD Screen Replacement, Motherboard, Battery, And Shutter button

11 questions Voir tout

Options

Power switch is not working properly

When pressing the power button, the camera turns on, extends the lens, but then immediately turns off. If I hold the power button down, it will stay on, allowing a picture to be taken. However, when I release the power button, the camera shuts off.

Sounds like a problem with the switch itself. I'm very good at repairing things, but would like some suggestions before I open the camera. There is a replacement part on EBay for the top of the camera, but it doesn't appear to include the actual switch (looks like the switch is activated by a pin that moves down when the power button is pushed).

Any ideas on how to fix this?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

Batteries? I use rechargeable batteries. My Sony Cyber-shot (inexpensive early model) did that when the batteries were wearing down. I hate to state the obvious in making sure it is not the batteries, but for myself, I have found that the simplest thing is usually the answer. Good thing too because taking things apart is my last resort.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

Chris West sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 7

30 derniers jours : 7

Total : 714