My camera was dropped and then stepped on. The camera still turns on, displays previously taken photos, and the flash and shutter go off when I try to take a picture. However, when displaying what the camera currently sees, the screen is completely black. Any pictures I take are also completely black. I would appreciate any help on how to fix this problem! Thank you!
Cette question est-elle utile ?
Rep: 862,7k
1,5k
980
2,4k
@sarahhardin this sound like either a lens and a sensor issue. This "camera was dropped and then stepped on" leads me to believe that a replacement of the lens and possibly the sensor would be the way to go.
Of course you can also check the lens by following this guide Démontage objectif Canon PowerShot SX200 IS To disassemble your camera use this guide Démontage Canon PowerShot SX200 IS as well as this video starting at around 2:30min
Tutoriel
Difficulté :
Modérée
—
1 hour
Tutoriel
Difficulté :
Modérée
—
1 hour
Cette réponse est-elle utile ?
Dernières 24 heures : 1
7 derniers jours : 7
30 derniers jours : 23
Total : 268
