There are 6 models in the LRA08PZU1 series i.e. LRA08PZU110, -111, -112, -113, -114 &-116, but they all appear to have the same wiring diagram. Although looking at the parts list it appears that models -110 to -113 use the same main board and control board and models -114 & -116 use the same boards but they are different boards to the the boards used by the other models.
+
There are 6 models in the LRA08PZU1 series i.e. LRA08PZU110, -111, -112, -113, -114 &-116, but they all appear to have the same wiring diagram. Although looking at the parts list it appears that models -110 to -113 use the same main board and control (display) board and models -114 & -116 use the same boards but they are different boards to the the boards used by the other models.
Here’s an image of the wiring diagram for the -110 model which may help.
[image|2365063]
(click on image to enlarge for better viewing)
-
Looking at the diagram (as minimal as it is) it appears as though everything is controlled by the control board controlling the main board. It appears as though relays are used to control the power to the compressor, the fan and the heating element.
+
Looking at the diagram (as minimal as it is) it seems as though everything is controlled by the control (display) board controlling the main board. It appears as though relays are used to control the power to the compressor, the fan and the heating element.
-
Is the compressor humming at all as if trying to start?
+
Can you hear if any of the relays “click” when trying to start the A/C?
+
+
Is the compressor humming at all as if trying to start? If so it may be the start/run capacitor that is the problem
You may have to open up the A/C and visually inspect the main board for any obvious problems and then start testing from there. The wiring diagram at least shows the connectors where the power comes into the board and also where all the peripheral components are connected to.
Here’s a link to a [link|https://www.partselect.com/Models/LRA08PZU110/Sections/RECOMMENDED-SPARE-PARTS/?ModelID=1513274&ModelNum=LRA08PZU110&mfgModelNum=&ManufactureID=4&Selected=BQ91JPKJ&Position=2&mfg=Frigidaire&Type=Air-Conditioner&Mark=2|supplier] that shows the parts for a -110 model which may help as it shows where everything is.
If it is determined that the problem is on the main board (part #37) and not the control board (part #8) I cannot find a schematic for the main board which would help to isolate it further but its part number is [link|https://www.ebay.com/itm/Frigidaire-5304483215-Room-Air-Conditioner-Electronic-Control-Board-Genuine-OEM-/193876734759|5304483215]
The same main board is used in models -110 to -113 but a different board part # [link|https://www.genuinereplacementparts.com/5304496429-oem|5304496429] is used in models -114 & -116.
I can’t find a schematic for the control board either - part #[link|https://www.repairclinic.com/PartDetail/Control-Board/5304482936/1941014|5304482936] (model numbers -110 to -113) and part #[link|https://partsdr.com/part/5304496261-user-control-and-display-board|5304496261] (models -114 & -116)
All the suppliers linked were just to show what the cost of the part may be. There are other suppliers online that may suit you better. Just search online for the part number ''only'' to get results.
There are 6 models in the LRA08PZU1 series i.e. LRA08PZU110, -111, -112, -113, -114 &-116, but they all appear to have the same wiring diagram. Although looking at the parts list it appears that models -110 to -113 use the same main board and control board and models -114 & -116 use the same boards but they are different boards to the the boards used by the other models.
Here’s an image of the wiring diagram for the -110 model which may help.
[image|2365063]
(click on image to enlarge for better viewing)
-
Looking at the diagram (as minimal as it is) it appears as though everything is controlled by the control board controlling the main board. It appears as though relays are used to control the compressor, the fan and the heating element. Not that helpful I know but still a start.
+
Looking at the diagram (as minimal as it is) it appears as though everything is controlled by the control board controlling the main board. It appears as though relays are used to control the power to the compressor, the fan and the heating element.
+
+
Is the compressor humming at all as if trying to start?
You may have to open up the A/C and visually inspect the main board for any obvious problems and then start testing from there. The wiring diagram at least shows the connectors where the power comes into the board and also where all the peripheral components are connected to.
Here’s a link to a [link|https://www.partselect.com/Models/LRA08PZU110/Sections/RECOMMENDED-SPARE-PARTS/?ModelID=1513274&ModelNum=LRA08PZU110&mfgModelNum=&ManufactureID=4&Selected=BQ91JPKJ&Position=2&mfg=Frigidaire&Type=Air-Conditioner&Mark=2|supplier] that shows the parts for a -110 model which may help as it shows where everything is.
If it is determined that the problem is on the main board (part #37) and not the control board (part #8) I cannot find a schematic for the main board which would help to isolate it further but its part number is [link|https://www.ebay.com/itm/Frigidaire-5304483215-Room-Air-Conditioner-Electronic-Control-Board-Genuine-OEM-/193876734759|5304483215]
The same main board is used in models -110 to -113 but a different board part # [link|https://www.genuinereplacementparts.com/5304496429-oem|5304496429] is used in models -114 & -116.
I can’t find a schematic for the control board either - part #[link|https://www.repairclinic.com/PartDetail/Control-Board/5304482936/1941014|5304482936] (model numbers -110 to -113) and part #[link|https://partsdr.com/part/5304496261-user-control-and-display-board|5304496261] (models -114 & -116)
All the suppliers linked were just to show what the cost of the part may be. There are other suppliers online that may suit you better. Just search online for the part number ''only'' to get results.
There are 6 models in the LRA08PZU1 series i.e. LRA08PZU110, -111, -112, -113, -114 &-116, but they all appear to have the same wiring diagram. Although looking at the parts list it appears that models -110 to -113 use the same main board and control board and models -114 & -116 use the same boards but they are different boards to the the boards used by the other models.
Here’s an image of the wiring diagram for the -110 model which may help.
[image|2365063]
(click on image to enlarge for better viewing)
-
Looking at the diagram (as minimal as it is) it appears as though everything is controlled by the control board controlling the main board. Not that helpful I know but still a start.
+
Looking at the diagram (as minimal as it is) it appears as though everything is controlled by the control board controlling the main board. It appears as though relays are used to control the compressor, the fan and the heating element. Not that helpful I know but still a start.
You may have to open up the A/C and visually inspect the main board for any obvious problems and then start testing from there. The wiring diagram at least shows the connectors where the power comes into the board and also where all the peripheral components are connected to.
-
Here’s a link to a [https://www.partselect.com/Models/LRA08PZU110/Sections/RECOMMENDED-SPARE-PARTS/?ModelID=1513274&ModelNum=LRA08PZU110&mfgModelNum=&ManufactureID=4&Selected=BQ91JPKJ&Position=2&mfg=Frigidaire&Type=Air-Conditioner&Mark=2|supplier] that shows the parts for a -110 model which may help as it shows where everything is.
+
Here’s a link to a [link|https://www.partselect.com/Models/LRA08PZU110/Sections/RECOMMENDED-SPARE-PARTS/?ModelID=1513274&ModelNum=LRA08PZU110&mfgModelNum=&ManufactureID=4&Selected=BQ91JPKJ&Position=2&mfg=Frigidaire&Type=Air-Conditioner&Mark=2|supplier] that shows the parts for a -110 model which may help as it shows where everything is.
-
If it is determined that the problem is on the main board (part #37) and not the control board (part #8) I cannot find a schematic for the main board which would help to isolate it further but its part number is [https://www.ebay.com/itm/Frigidaire-5304483215-Room-Air-Conditioner-Electronic-Control-Board-Genuine-OEM-/193876734759|5304483215]
+
If it is determined that the problem is on the main board (part #37) and not the control board (part #8) I cannot find a schematic for the main board which would help to isolate it further but its part number is [link|https://www.ebay.com/itm/Frigidaire-5304483215-Room-Air-Conditioner-Electronic-Control-Board-Genuine-OEM-/193876734759|5304483215]
-
The same main board is used in models -110 to -113 but a different board part # [https://www.genuinereplacementparts.com/5304496429-oem|5304496429] is used in models -114 & -116.
+
The same main board is used in models -110 to -113 but a different board part # [link|https://www.genuinereplacementparts.com/5304496429-oem|5304496429] is used in models -114 & -116.
-
I can’t find a schematic for the control board either - part #[https://www.repairclinic.com/PartDetail/Control-Board/5304482936/1941014|5304482936] (model numbers -110 to -113) and part #[https://partsdr.com/part/5304496261-user-control-and-display-board|5304496261] (models -114 & -116)
+
I can’t find a schematic for the control board either - part #[link|https://www.repairclinic.com/PartDetail/Control-Board/5304482936/1941014|5304482936] (model numbers -110 to -113) and part #[link|https://partsdr.com/part/5304496261-user-control-and-display-board|5304496261] (models -114 & -116)
All the suppliers linked were just to show what the cost of the part may be. There are other suppliers online that may suit you better. Just search online for the part number ''only'' to get results.
Hi @tmr1975 ,
There are 6 models in the LRA08PZU1 series i.e. LRA08PZU110, -111, -112, -113, -114 &-116, but they all appear to have the same wiring diagram. Although looking at the parts list it appears that models -110 to -113 use the same main board and control board and models -114 & -116 use the same boards but they are different boards to the the boards used by the other models.
Here’s an image of the wiring diagram for the -110 model which may help.
[image|2365063]
(click on image to enlarge for better viewing)
Looking at the diagram (as minimal as it is) it appears as though everything is controlled by the control board controlling the main board. Not that helpful I know but still a start.
You may have to open up the A/C and visually inspect the main board for any obvious problems and then start testing from there. The wiring diagram at least shows the connectors where the power comes into the board and also where all the peripheral components are connected to.
Here’s a link to a [https://www.partselect.com/Models/LRA08PZU110/Sections/RECOMMENDED-SPARE-PARTS/?ModelID=1513274&ModelNum=LRA08PZU110&mfgModelNum=&ManufactureID=4&Selected=BQ91JPKJ&Position=2&mfg=Frigidaire&Type=Air-Conditioner&Mark=2|supplier] that shows the parts for a -110 model which may help as it shows where everything is.
If it is determined that the problem is on the main board (part #37) and not the control board (part #8) I cannot find a schematic for the main board which would help to isolate it further but its part number is [https://www.ebay.com/itm/Frigidaire-5304483215-Room-Air-Conditioner-Electronic-Control-Board-Genuine-OEM-/193876734759|5304483215]
The same main board is used in models -110 to -113 but a different board part # [https://www.genuinereplacementparts.com/5304496429-oem|5304496429] is used in models -114 & -116.
I can’t find a schematic for the control board either - part #[https://www.repairclinic.com/PartDetail/Control-Board/5304482936/1941014|5304482936] (model numbers -110 to -113) and part #[https://partsdr.com/part/5304496261-user-control-and-display-board|5304496261] (models -114 & -116)
All the suppliers linked were just to show what the cost of the part may be. There are other suppliers online that may suit you better. Just search online for the part number ''only'' to get results.
Hopefully this is of some help.