Aller au contenu principal
Aide

Version actuelle par : jayeff

Texte:

Hi @rsiopa,
-The missing #24 pin may be just because it wasn't necessary as there seems to be two distinct cables connected i.e. red/yellow/black wires which look like some sort of power supply and a video cable (sheathed, shielded cable)
+The missing #24 pin may be just because it wasn't necessary since it is not being used. There seems to be two distinct cables connected i.e. red/yellow/black wires which look like some sort of power supply and a video cable (sheathed, shielded cable)
Try shining a flashlight at an angle close to the laptop's screen and check if you can detect any images on the screen.
They will be very faint if they are there so trying this in a darkened room may help.
''If you can see images'' then there's a backlight problem with the screen.
-Either a faulty backlight power circuit (fuse? - check for a voltage <20V?) on pin 22 & 23 of the video cable connector, ''be careful that you don't short out the pin to the next pin with the meter test probe -'' see image below''.'') a faulty cable or cable connection (either end, motherboard or screen) or perhaps a faulty backlight circuit in the display.
+Either a faulty backlight power circuit (fuse? - check for a voltage <20V?) on pins 22 & 23 of the video cable connector, ''be careful that you don't short out the pins to the next pin with the meter test probe -'' see image below''.'') a faulty cable or cable connection (either end, motherboard or screen) or perhaps a faulty backlight circuit in the display.
Here's an image of the LCD connector wiring from a Toshiba L655D that may help
[image|2875473]
(click on image)

Statut:

open

Modifié par : jayeff

Texte:

Hi @rsiopa,
-The missing pin may be just because it wasn't necessary as there seems to be two distinct cables connected i.e. red/yellow/black wires which look like some sort of power supply and a video cable (sheathed, shielded cable)
+The missing #24 pin may be just because it wasn't necessary as there seems to be two distinct cables connected i.e. red/yellow/black wires which look like some sort of power supply and a video cable (sheathed, shielded cable)
Try shining a flashlight at an angle close to the laptop's screen and check if you can detect any images on the screen.
They will be very faint if they are there so trying this in a darkened room may help.
''If you can see images'' then there's a backlight problem with the screen.
Either a faulty backlight power circuit (fuse? - check for a voltage <20V?) on pin 22 & 23 of the video cable connector, ''be careful that you don't short out the pin to the next pin with the meter test probe -'' see image below''.'') a faulty cable or cable connection (either end, motherboard or screen) or perhaps a faulty backlight circuit in the display.
Here's an image of the LCD connector wiring from a Toshiba L655D that may help
-[image|2875473] (click on image)
+[image|2875473]
+
+(click on image)

Statut:

open

Modifié par : jayeff

Texte:

Hi @rsiopa,
The missing pin may be just because it wasn't necessary as there seems to be two distinct cables connected i.e. red/yellow/black wires which look like some sort of power supply and a video cable (sheathed, shielded cable)
Try shining a flashlight at an angle close to the laptop's screen and check if you can detect any images on the screen.
They will be very faint if they are there so trying this in a darkened room may help.
''If you can see images'' then there's a backlight problem with the screen.
-Either a faulty backlight power circuit (fuse? - check for a voltage <20V?) on the red wire pin of the video cable connector, ''be careful that you don't short out the pin to the next pin with the meter test probe.'') a faulty cable or cable connection (either end, motherboard or screen) or perhaps a faulty backlight circuit in the display
+Either a faulty backlight power circuit (fuse? - check for a voltage <20V?) on pin 22 & 23 of the video cable connector, ''be careful that you don't short out the pin to the next pin with the meter test probe -'' see image below''.'') a faulty cable or cable connection (either end, motherboard or screen) or perhaps a faulty backlight circuit in the display.
+
+Here's an image of the LCD connector wiring from a Toshiba L655D that may help
+
+[image|2875473] (click on image)

Statut:

open

Modifié par : jayeff

Texte:

Hi @rsiopa,
The missing pin may be just because it wasn't necessary as there seems to be two distinct cables connected i.e. red/yellow/black wires which look like some sort of power supply and a video cable (sheathed, shielded cable)
Try shining a flashlight at an angle close to the laptop's screen and check if you can detect any images on the screen.
They will be very faint if they are there so trying this in a darkened room may help.
-If you can see images then there's a backlight problem with the screen.
+''If you can see images'' then there's a backlight problem with the screen.
-Either a faulty backlight power circuit (fuse? - check for a voltage <20V?) on the red wire pin of the video cable connector, ''be careful that you don't short out the pin to the next pin with the meter test probe.'') a faulty video cable or video cable connection (either end, motherboard or screen) or perhaps a faulty backlight circuit in the display
+Either a faulty backlight power circuit (fuse? - check for a voltage <20V?) on the red wire pin of the video cable connector, ''be careful that you don't short out the pin to the next pin with the meter test probe.'') a faulty cable or cable connection (either end, motherboard or screen) or perhaps a faulty backlight circuit in the display

Statut:

open

Modifié par : jayeff

Texte:

Hi @rsiopa,
-The missing pin may be just because it wasn't necessary as there seems to be two distinct cables connected i.e. red/yellow/black wires which look like some sort of power supply and a video cable
+The missing pin may be just because it wasn't necessary as there seems to be two distinct cables connected i.e. red/yellow/black wires which look like some sort of power supply and a video cable (sheathed, shielded cable)
Try shining a flashlight at an angle close to the laptop's screen and check if you can detect any images on the screen.
They will be very faint if they are there so trying this in a darkened room may help.
If you can see images then there's a backlight problem with the screen.
Either a faulty backlight power circuit (fuse? - check for a voltage <20V?) on the red wire pin of the video cable connector, ''be careful that you don't short out the pin to the next pin with the meter test probe.'') a faulty video cable or video cable connection (either end, motherboard or screen) or perhaps a faulty backlight circuit in the display

Statut:

open

Modifié par : jayeff

Texte:

Hi @rsiopa,
The missing pin may be just because it wasn't necessary as there seems to be two distinct cables connected i.e. red/yellow/black wires which look like some sort of power supply and a video cable
Try shining a flashlight at an angle close to the laptop's screen and check if you can detect any images on the screen.
They will be very faint if they are there so trying this in a darkened room may help.
-if you can see images then there's a backlight problem wit the screen.
+If you can see images then there's a backlight problem with the screen.
Either a faulty backlight power circuit (fuse? - check for a voltage <20V?) on the red wire pin of the video cable connector, ''be careful that you don't short out the pin to the next pin with the meter test probe.'') a faulty video cable or video cable connection (either end, motherboard or screen) or perhaps a faulty backlight circuit in the display

Statut:

open

Modifié par : jayeff

Texte:

Hi @rsiopa,
The missing pin may be just because it wasn't necessary as there seems to be two distinct cables connected i.e. red/yellow/black wires which look like some sort of power supply and a video cable
Try shining a flashlight at an angle close to the laptop's screen and check if you can detect any images on the screen.
They will be very faint if they are there so trying this in a darkened room may help.
if you can see images then there's a backlight problem wit the screen.
-Either a faulty backlight power circuit (fuse? - check for a voltage <20V?) on the red wire pin of the video cable, ''be careful that you don't short out the pin to the next pin with the meter test probe.'') a faulty video cable or video cable connection (either end, motherboard or screen) or perhaps a faulty backlight circuit in the display
+Either a faulty backlight power circuit (fuse? - check for a voltage <20V?) on the red wire pin of the video cable connector, ''be careful that you don't short out the pin to the next pin with the meter test probe.'') a faulty video cable or video cable connection (either end, motherboard or screen) or perhaps a faulty backlight circuit in the display

Statut:

open

Contribution d'origine par : jayeff

Texte:

Hi @rsiopa,

The missing pin may be just because it wasn't necessary as there seems to be two distinct cables connected i.e. red/yellow/black wires which look like some sort of power supply and a video cable

Try shining a flashlight at an angle close to the laptop's screen and check if you can detect any images on the screen.

They will be very faint if they are there so trying this in a darkened room may help.

if you can see images then there's a backlight problem wit the screen.

Either a faulty backlight power circuit (fuse? - check for a voltage <20V?) on the red wire pin of the video cable, ''be careful that you don't short out the pin to the next pin with the meter test probe.'') a faulty video cable or video cable connection (either end, motherboard or screen) or perhaps a faulty backlight circuit in the display

Statut:

open