Asus VivoTab RT TF600T LCD Screen Replacement

Dernière mise à jour le March 7, 2016

15 minutes

Facile

Introduction

If your screen is cracked, broken, scratched, or otherwise in need of replacing, this guide will show you how to disassemble your computer, and replace the screen with a new one.

Ce dont vous avez besoin

Pièces

ASUS VivoTab RT (TF600) Display Assembly
Afficher

Outils

Afficher plus…

Étape 1 LCD Screen

Asus VivoTab RT TF600T LCD Screen Replacement, LCD Screen: étape 1, image 1 de 3

Asus VivoTab RT TF600T LCD Screen Replacement, LCD Screen: étape 1, image 2 de 3

Asus VivoTab RT TF600T LCD Screen Replacement, LCD Screen: étape 1, image 3 de 3

Make sure the tablet is turned off.
Remove the tablet from the attached keyboard.
To remove the keyboard, simply depress the switch on the left side of the screen and pull the tablet portion off.

Modifier

Étape 2

Asus VivoTab RT TF600T LCD Screen Replacement: étape 2, image 3 de 3

Rotate the device 180°, and remove the two 1.59 mm screws at the bottom of the device.
Use the Phillips screwdriver size #000 to remove the two 1.59 mm screws.

Modifier

Étape 3

Use the plastic opening tool to help detach the screen from the back panel.
Insert the plastic opening tool into the bottom right corner and gently start to pry off the screen.
Once the screen begins to separate from the body of the device, start working the tool around the outer edges until the entire screen becomes detached.

Modifier

Étape 4

Now that the screen is completely detached, lay the back panel flat on a smooth surface.
Lift the screen to view the inside of the tablet.

Modifier

Étape 5

Before disconnecting the display cables, refer to the image to turn off the switch labeled DIP; this switch is used to de-energize the system.
The battery is connected to the motherboard. To avoid any short circuiting of the device, you must place the switch labeled DIP to OFF.

Modifier

Étape 6

Asus VivoTab RT TF600T LCD Screen Replacement: étape 6, image 3 de 3

Remove the yellow tape covering the end of the cables.

Modifier

Étape 7

After lifting the yellow tape, you should be able to see a white strip. The white strip is actually a lever.
Use the plastic opening tool to push in the levers.

Modifier

Étape 8

Asus VivoTab RT TF600T LCD Screen Replacement: étape 8, image 3 de 3

With all three white levers pushed in, gently pull on each display cable until the cable disconnects.

Modifier

Étape 9

Lift the screen upwards to remove.

Modifier

Conclusion

Congratulations! You have now successfully removed the screen from your device. To attach your new screen and reassemble your device follow these instructions in reverse order.

5 autres ont terminé cette réparation.