/
Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
S'inscrire
Connexion
Rejoignez la plus grande communauté de réparation au monde
Pièces
TutorielsRéponses
Modifier
Disassembling Compaq Mini 110 Heat Sink

Disassembling Compaq Mini 110 Heat Sink

alea

alea et 5 autres contributeurs

Dernière mise à jour le January 28, 2014

1 minute
Très facile
Étapes manquantes
Photos d’action

Introduction

Passez à l'étape 1

This little dude can get in your way, so move him out.

Ce dont vous avez besoin

Outils

  • Phillips #0 Screwdriver
    Phillips #0 Screwdriver
  • Spudger
    Spudger

Afficher plus…

  1. Disassembling Compaq Mini 110 Heat Sink, Battery: étape 1, image 1 de 2 Disassembling Compaq Mini 110 Heat Sink, Battery: étape 1, image 2 de 2

    • Locate the battery and the battery tabs on the bottom of the Compaq Mini.

    Modifier

  2. Disassembling Compaq Mini 110 Heat Sink: étape 2, image 1 de 3 Disassembling Compaq Mini 110 Heat Sink: étape 2, image 2 de 3 Disassembling Compaq Mini 110 Heat Sink: étape 2, image 3 de 3

    • Push both tabs inward simultaneously and slide the battery out.

    Modifier

  3. Disassembling Compaq Mini 110 Heat Sink, RAM: étape 3, image 1 de 2 Disassembling Compaq Mini 110 Heat Sink, RAM: étape 3, image 2 de 2

    • Use a Philips #0 screwdriver to unscrew the two screws covering the memory compartment on the bottom of the laptop and remove the cover.

    Modifier

  4. Disassembling Compaq Mini 110 Heat Sink: étape 4, image 1 de 1

    • Push out the side tabs simultaneously and pull out the old RAM module.

    • When inserting a new RAM stick, be sure to evenly insert the gold pins in the same orientation that the old module was removed. While sliding the module in, press the side tabs in place.

    Modifier

  5. Disassembling Compaq Mini 110 Heat Sink, Keyboard: étape 5, image 1 de 2 Disassembling Compaq Mini 110 Heat Sink, Keyboard: étape 5, image 2 de 2

    • Remove the rubber pads located on the corners of your Compaq Mini.

    • There may be junk underneath it. This is residue left from the glue that held on the rubber pad. Just scrape it away to find the screw.

    Modifier

  7. Disassembling Compaq Mini 110 Heat Sink: étape 6, image 1 de 2 Disassembling Compaq Mini 110 Heat Sink: étape 6, image 2 de 2

    • Unscrew all the corner screws. There are four total, one under each rubber pad.

    Modifier

  8. Disassembling Compaq Mini 110 Heat Sink: étape 7, image 1 de 2 Disassembling Compaq Mini 110 Heat Sink: étape 7, image 2 de 2

    • Unscrew the screw for the bottom case located in the RAM compartment.

    Modifier

  9. Disassembling Compaq Mini 110 Heat Sink: étape 8, image 1 de 2 Disassembling Compaq Mini 110 Heat Sink: étape 8, image 2 de 2

    • Remove the three screws in the silver tabs at the back of the keyboard.

    • These are located at the back of the base under the screen.

    • Lift the keyboard away from the laptop.

    Modifier

  10. Disassembling Compaq Mini 110 Heat Sink, Hard Drive: étape 9, image 1 de 1

    • Remove the three screws holding the panel in place.

    Modifier

  11. Disassembling Compaq Mini 110 Heat Sink: étape 10, image 1 de 2 Disassembling Compaq Mini 110 Heat Sink: étape 10, image 2 de 2

    • Pull up on the tab to remove the hard drive.

    Modifier

  12. Disassembling Compaq Mini 110 Heat Sink, Top Cover: étape 11, image 1 de 1

    • Remove the eight screws that are from the plastic top cover.

    Modifier

  13. Disassembling Compaq Mini 110 Heat Sink: étape 12, image 1 de 3 Disassembling Compaq Mini 110 Heat Sink: étape 12, image 2 de 3 Disassembling Compaq Mini 110 Heat Sink: étape 12, image 3 de 3

    • Pry up the top plastic cover using a spudger.

    • These two tabs under the screen need to be pushed in with a spudger.

    Modifier

  14. Disassembling Compaq Mini 110 Heat Sink: étape 13, image 1 de 2 Disassembling Compaq Mini 110 Heat Sink: étape 13, image 2 de 2

    • Remove the cable by carefully pulling it up.

    • Be careful when lifting up the cover because the track pad is still attached.

    Modifier

  15. Disassembling Compaq Mini 110 Heat Sink, Heat Sink: étape 14, image 1 de 2 Disassembling Compaq Mini 110 Heat Sink, Heat Sink: étape 14, image 2 de 2

    • Remove all four screws.

    • The underside has lubricant to help the heat sink do its job. Be careful not to smear it all over the place.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

alea

Membre depuis le 10/06/10

1 417 Réputation

14 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

Cal Poly, Team 22-2, Maness Fall 2010 Membre de l'équipe Cal Poly, Team 22-2, Maness Fall 2010

CPSU-MANESS-F10S22G2

6 membres

20 tutoriels rédigés

0 commentaires de tutoriel

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 22

Total : 4,093