Réparez vos affaires Communauté Boutique

HP Compaq 2510p Power/audio bar Replacement

Introduction

This guide will show step-by-step instruction depicting the replacement of your laptops power/audio bar.

Ce dont vous avez besoin

  1. HP Compaq 2510p Power/audio bar Replacement, Power/audio bar: étape 1, image 1 de 1

    • Locate the 4 screws in the four corners of the laptop screen.

    • The screws may be hidden underneath a small rubber pad.

    • Be sure to ground yourself and tools before working near electronics.

    Traduire

  2. HP Compaq 2510p Power/audio bar Replacement: étape 2, image 1 de 1

    • Use a Flathead screwdriver to remove the 4 rubber covers over the 4 screws referenced in step 1.

    Traduire

  3. HP Compaq 2510p Power/audio bar Replacement: étape 3, image 1 de 1

    • Once the rubber has been removed a screw will be revealed. Remove each of the four screws with your Philips head screwdriver.

    Traduire

  4. HP Compaq 2510p Power/audio bar Replacement: étape 4, image 1 de 1

    • Insert your spudger along the top of the screen, separating the plastic cover and the screen

    Traduire

  6. HP Compaq 2510p Power/audio bar Replacement: étape 5, image 1 de 1

    • Continue running your Flathead along the top of the screen until the top is completely separated.

    Traduire

  7. HP Compaq 2510p Power/audio bar Replacement: étape 6, image 1 de 2 HP Compaq 2510p Power/audio bar Replacement: étape 6, image 2 de 2

    • Pull the plastic covering of the screen towards the keyboard, exposing the inner workings of the screen.

    Traduire

  8. HP Compaq 2510p Power/audio bar Replacement: étape 7, image 1 de 1

    • Locate the hinges at the bottom left, and right of the screen

    Traduire

  9. HP Compaq 2510p Power/audio bar Replacement: étape 8, image 1 de 2 HP Compaq 2510p Power/audio bar Replacement: étape 8, image 2 de 2

    • Separate the Power/Audio bar from the hinge by gently pulling.

    Traduire

  10. HP Compaq 2510p Power/audio bar Replacement: étape 9, image 1 de 1

    • Flip the Power/Audio bar over exposing the ribbon wire and its connection to the Power/Audio bar.

    Traduire

  11. HP Compaq 2510p Power/audio bar Replacement: étape 10, image 1 de 1

    • Separate the ribbon wire by gently pulling the wire from its socket.

    • The wire will be separated and the bar is free.

    • Be gentle as you pull.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Derek Kohansky

Membre depuis le 10/26/16

297 Réputation

2 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

UMass Dartmouth, Team 3-8, Isaacson Fall 2016 Membre de l'équipe UMass Dartmouth, Team 3-8, Isaacson Fall 2016

UMASSD-ISAACSON-F16S3G8

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 365